Polyester filament geotextile
Category：
Product Introduction
Polyester filament geotextile is made of polyester filaments through needle punching and consolidation. It is made by the method of polyester filaments forming a net and consolidating, and its fibers are arranged into a three-dimensional structure.
Features
Polyester long-fiber non-woven geotextile has excellent heat and light resistance. Even if it is exposed to an environment of nearly 20°C for a short period of time, its performance is almost unchanged. After a large number of tests and practices, it has been proved that polyester long-fiber non-woven geotextile has long-term corrosion resistance to various natural soils, moisture and microorganisms. This product is mainly used for the following features:
1. It can play a permanent isolation role: it can isolate soil layers composed of different components and properties for a long time and prevent mixing; it has frost resistance and the load-bearing requirements required for construction.
2. It has good anti-filtration and anti-corrosion properties: water can penetrate in all directions without accumulating pressure. At the same time, it can prevent soil loss, which is beneficial to stability and anti-corrosion performance.
3. It has reliable drainage performance: due to the fluffiness of its structure, it can effectively control the drainage of the surface of geotechnical engineering.
4. It has good protection performance: due to its good puncture resistance, extensibility and fluffiness, it can effectively protect the waterproof layer from potential mechanical damage.
5. It has reinforcement performance: the fluffiness and high strength improve the overall stability of the project and increase its strength.
Product Usage
Mainly used for filtration of dams and slope protection of water conservancy projects, isolation and anti-seepage of channels; isolation, filtration and drainage of foundations of roads, railways and airport runways; reinforcement and drainage of earth slopes, retaining walls and pavements; soft foundation treatment of port projects, reinforcement and drainage of beach embankments, seaport terminals and breakwaters; polyester filament geotextiles have been widely used in the field of infrastructure construction and are gradually being used in a wider range of fields.
Product specifications and performance parameters GB/T 17639-2008
| item item | Pointer mark | ||||||||
| Nominal breaking strength kN/m | 4.5 | 7.5 | 10 | 15 | 20 | 25 | 30 | 40 | 50 |
| Vertical and transverse fracture strength kN/m≥ | 7.5 | 10.0 | 15.0 | 20.0 | 25.0 | 30.0 | 40.0 | 50.0 | |
| Vertical and transverse standard strength corresponding elongation% | 40-80 | ||||||||
| CBR bursting strength kN≥ | 0.8 | 1.6 | 1.9 | 2.9 | 3.9 | 5.3 | 6.4 | 7.9 | 8.5 |
| Vertical and horizontal tearing strength kN≥ | 0.14 | 0.21 | 0.28 | 0.42 | 0.56 | 0.70 | 0.82 | 1.10 | 1.25 |
| Equivalent pore size 0₀ (O₉ s) mm | 0.05-0.20 | ||||||||
| Vertical permeability cm/s | K×(10-¹-10-³) Where: K=1.0-9.9 | ||||||||
| Thickness m m ≥ | 0.8 | 1.2 | 1.6 | 2.2 | 2.8 | 3.4 | 4.2 | 5.5 | 6.8 |
| Width deviation% | -0.5 | ||||||||
| Unit area mass deviation% | -5 | ||||||||
Previous：
相关产品
Related Products
Get Quote
*Contact us now, starting from the first communication!
Service E-mail
Address
North of Taixin Road, East of Nanshilihe, Taishan District, Tai'an City, Shandong Province
To inquire about our products, please leave your email to us and we will contact you within 24 hours.
Copyright:© Tai'an Jiuzhou Geotechnical Materials Co., Ltd CEGLOBAL
